初期状態
pdaXromをインストールした時点での状態。
# uname -a Linux zaurus 2.4.18-rmk7-pxa3-embedix #1 Mon, 14 Nov 2005 20:35:45 +0000 armv5tel unknown # ps -aux PID Uid VmSize Stat Command 1 root 524 S ini 2 root SW [keventd] 3 root RWN [kapm-idled] 4 root SW [off_thread] 5 root DW [off_thread] 6 root SW [battchrgon] 7 root SW [battchrgoff] 8 root SW [sharpsl_bat] 9 root SWN [ksoftirqd_CPU0] 10 root SW [kswapd] 11 root SW [bdflush] 12 root SW [kupdated] 13 root SW [buzzer] 14 root SW [snd_hp] 16 root SW [mtdblockd] 17 root SW [krfcommd] 21 root 676 S /sbin/devfsd /dev 57 root SWN [jffs2_gcd_mtd2] 97 root 612 S /sbin/syslogd -S 142 root 324 S /sbin/sdmgr 146 root 724 S /sbin/cardmgr 219 root 1344 S /usr/sbin/sshd 249 root 1492 S -bash 284 root 588 R ps -aux # netstat -an Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN Active UNIX domain sockets (servers and established) Proto RefCnt Flags Type State I-Node Path unix 2 [ ] DGRAM 1199 /dev/log # df -k Filesystem 1k-blocks Used Available Use% Mounted on /dev/mtdblock/2 123904 42952 80952 35% / none 12288 20 12268 0% /dev/shm /dev/mtdblock/2 123904 42952 80952 35% /mnt/user /dev/mmcd/disc0/part1 62032 44592 17440 72% /mnt/card # free total used free shared buffers Mem: 61888 12636 49252 0 28 Swap: 0 0 0 Total: 61888 12636 49252 # mount /dev/mtdblock/2 on / type jffs2 (rw,noatime) none on /dev type devfs (rw) /proc on /proc type proc (rw) none on /dev/shm type tmpfs (rw) none on /dev/pts type devpts (rw) /dev/mtdblock/2 on /mnt/user type jffs2 (rw,noatime) /dev/mmcd/disc0/part1 on /mnt/card type vfat (rw) # dmesg Linux version 2.4.18-rmk7-pxa3-embedix-021129 (sash@pdaX86) (gcc version 2.95.3 20010315 (release)) #1 Mon, 14 Nov 2005 20:35:45 +0000 CPU: Intel XScale-PXA255 revision 6 Machine: SHARP Shepherd Converting old-style param struct to taglist Memory clock: 99.53MHz (*27) Run Mode clock: 199.07MHz (*2) Turbo Mode clock: 398.13MHz (*2.0, active) On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttyS0 root=/dev/mtdblock2 mtdparts=sharpsl-nand:7168k@0k(smf),123904k@7168k(root),-(home) jffs2_orphaned_inodes=delete Console: colour dummy device 80x30 Calibrating delay loop... 397.31 BogoMIPS Memory: 64MB = 64MB total Memory: 61732KB available (2104K code, 472K data, 156K init) Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes) Inode-cache hash table entries: 4096 (order: 3, 32768 bytes) Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket BlueZ Core ver 2.4 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com> RCSR = 5 apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14) batok installed Starting kswapd Journalled Block Device driver loaded devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB. reset resolution unkown => 640x480 Console: switching to colour frame buffer device 80x30 fb0: W100FB frame buffer device keyboard initilaized. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with no serial options enabled SharpSL serial driver version 5.05c (2001-07-08) with no serial options enabled ttyS00 at 0xf8100000x (irq = 14) is a 16550A ttyS01 at 0xf8700000x (irq = 12) is a 16550A, using IRDA ttyS02 at 0xf8200000x (irq = 13) is a 16550A rs_init: IRDA H/W initializaion sharpled_init: done. corgi remote controller Cotulla Real Time Clock driver v1.00 Cotulla Touch Screen driver initialized block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx loop: loaded (max 8 devices) PPP generic driver version 2.4.1 PPP BSD Compression module registered ide-cs.c 1.26 1999/11/16 02:10:49 (David Hinds) SCSI subsystem driver Revision: 1.00 request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted Corgi audio driver initialize Sharp SL series flash device: 1000000 at 0 Using static partision definition Creating 1 MTD partitions on "sharpsl-flash": 0x00120000-0x007f0000 : "Filesystem" NAND device: Manufacture ID: 0xec, Chip ID: 0x79 (Samsung K9D1G08V0M) Creating 3 MTD partitions on "Samsung K9D1G08V0M": 0x00000000-0x00700000 : "smf" 0x00700000-0x08000000 : "root" 0x08000000-0x08000000 : "home" mtd: partition "home" is out of reach -- disabled Linux Kernel Card Services 3.1.22 options: [pm] Intel PXA250/210 PCMCIA (CS release 3.1.22) pxa_pcmcia_init(0) pxa_pcmcia_init(1) Backlight Driver Initialized. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 4096) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. BlueZ L2CAP ver 2.3 Copyright (C) 2000,2001 Qualcomm Inc Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com> BlueZ RFCOMM ver 1.1 Copyright (C) 2002 Maxim Krasnyansky <maxk@qualcomm.com> Copyright (C) 2002 Marcel Holtmann <marcel@holtmann.org> BlueZ BNEP ver 1.2 Copyright (C) 2001,2002 Inventel Systemes Written 2001,2002 by Clement Moreau <clement.moreau@inventel.fr> Written 2001,2002 by David Libault <david.libault@inventel.fr> Copyright (C) 2002 Maxim Krasnyanskiy <maxk@qualcomm.com> NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com IrCOMM protocol (Dag Brattli) cramfs: wrong magic FAT: bogus logical sector size 381 VFS: Mounted root (jffs2 filesystem) readonly. Mounted devfs on /dev Freeing init memory: 156K jffs2: Too few erase blocks (0) power_key_off = 1 sdcardmgr: SD card inserted! SD card manager installed. SD card manager uninstalled. [SD]-clustsize = 4000 Partition check: mmcda: p1 SD Driver Initialized. sharp_mmcsd 0.21 27 Sep 2002 VFS: Disk change detected on device mmcd(60,1) mmcd/disc0/disc: p1 devfs_register(part1): could not append to parent, err: -17 VFS: Disk change detected on device mmcd(60,1) mmcd/disc0/disc: p1 devfs_register(part1): could not append to parent, err: -17 VFS: Disk change detected on device mmcd(60,1) mmcd/disc0/disc: p1 devfs_register(part1): could not append to parent, err: -17 usbdm: usbd_monitor 0.3 035 2002-06-12 20:00 monitor_connected: 1 monitor_load: monitor_hotplug: agent: usbd interface: monitor action: load usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="") net_fd 0.1 035 2002-06-12 20:00 (dbg="",alwaysup=0,OUT=64,IN=64) vendorID: 4dd productID: 9031 pxa_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="") bi_modinit: call udc_startup_events bi_device_event: call udc_enable bi_device_event: call udc_all_interrupts monitor_modinit: finished apm_console_blank: blank=0 set_power_state: what=256 state=0 send_event: event=0 power button start off sequence ! power button apm_console_blank: blank=1 monitor_hotplug: agent: usbd interface: monitor action: suspend apm_console_blank: blank=0 udc_disable: ep0_urb already NULL udc_disable: ep0_urb already NULL usbdcore: usbdcore 0.1 035 2002-06-12 20:00 exiting monitor_pm_event: suspend finished (rc=0) pxa_sd_wait_response: responce time out (cmd=07 MMC_STAT=0x2142) sharp_sl_nand_suspend return to suspend .... FCS : CCCR = 161 sharp_sl_nand_resume pxa_pcmcia_init(0) pxa_pcmcia_init(1) [SD]-clustsize = 4000 hotplug_schedule_bh: schedule bh hotplug_bh: monitor_connected: 1 monitor_restore: RESTORE_LOADED monitor_hotplug: agent: usbd interface: monitor action: restore-loaded set_power_state: what=256 state=0 send_event: event=0 usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="") net_fd 0.1 035 2002-06-12 20:00 (dbg="",alwaysup=0,OUT=64,IN=64) vendorID: 4dd productID: 9031 pxa_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="") bi_modinit: call udc_startup_events bi_device_event: call udc_enable bi_device_event: call udc_all_interrupts start check battery ! apm_console_blank: blank=1 set_power_state: what=256 state=1 send_event: event=1